CZ DUTY 4.0 C MS
About this product
Across Kansas, a 9mm that rides in a truck console all week and goes to the range on Saturday needs to be simple and tough. CZ's new DUTY 4.0 fits that life. It is a striker-fired 9x19mm with a fiberglass-reinforced polymer frame and a serialized internal chassis, so the grip frame is a modular part. The barrel is 4 inches and not threaded, the sights are fixed, and the slide takes a red dot by direct mount.
Kansas shooters who want a belt gun will lean toward the C compact: 15+1 rounds, 17+1 with the extended base plate, 770 g and 135 mm tall. Those who want a full grip for the range will prefer the F full-size: 17+1, 19+1 extended, 780 g and 143 mm tall. Either one measures 188 mm long by 33 mm wide. Trigger pull is about 5.6 lbs, reset 4 mm. Order the MS version if you want a manual thumb safety added to the three internal safeties. MSRP is $729.
The C is the compact frame. It stands 135 mm (5.3 in) tall, weighs 770 g (27.2 oz) with an empty magazine and carries 15+1 rounds of 9mm, or 17+1 once the extended base plate is fitted. Short enough to hide under a shirt, long enough to get every finger on the grip.
Three things define the DUTY 4.0. First, a registered modular chassis: the registered part is inside, the grip module around it is modular. Second, the trigger, a striker SFDA rated at 25 ± 4 N (5.6 ± 0.9 lbs), 4 mm (0.16 in) reset, 9 ± 1 mm (0.4 ± 0.04 in) travel, which is short and repeatable for a service pistol. Third, a direct-mount optics-ready slide, shown by CZ with Holosun, Aimpoint and Shield dots fitted, so a optic sits low without a stack of plates.
The MS model carries a frame-mounted manual safety on top of the firing pin block, trigger safety and trigger-bar safety. Everything else, chassis, trigger, slide and optics cut, is the same as the version without the lever.
Who is it for: daily carry, a bedside gun that also rides along, and new shooters who want one pistol for everything. If you already shoot a P-10, the DUTY is the next step in the same family, with a new chassis and the optics done right.
Your DUTY 4.0 ships to the Kansas FFL dealer you choose at checkout, or to a dealer in another state if you live elsewhere. That dealer does the transfer paperwork and applies the rules of that state at pickup. We do not ship complete pistols to a home address. Choose your dealer before ordering so the pistol has a clear destination.
Specs at a glance
Specifications
| Caliber | 9x19mm (9mm Luger) |
| Magazine capacity | 15+1 (17+1 with the extended base plate) |
| Barrel length | 102 mm (4 in) |
| Overall length | 188 mm (7.4 in) |
| Width | 33 mm (1.3 in) |
| Height | 135 mm (5.3 in) |
| Weight (empty magazine) | 770 g (27.2 oz) |
| Frame | fiberglass-reinforced polymer |
| Trigger | SFDA striker-fired |
| Trigger pull | 25 ± 4 N (5.6 ± 0.9 lbs) |
| Trigger reset | 4 mm (0.16 in) |
| Trigger travel | 9 ± 1 mm (0.4 ± 0.04 in) |
| Safeties | Firing pin block, trigger safety, trigger bar safety, manual thumb safety |
| Sights | Fixed |
| Threaded barrel | No |
| Optics | Direct-mount optics ready |
| Manufacturer | CZ (Česká zbrojovka) |
| MSRP | $729 |
Frequently asked questions
- Can I have the DUTY 4.0 sent to a dealer outside Kansas?
- Yes. Pick any FFL dealer in your state at checkout and the pistol ships there. The dealer applies that state's rules at pickup.
- Is the DUTY 4.0 barrel threaded for a suppressor?
- No. The 4-inch barrel on both the C and F models is not threaded.
- What does MS mean on the CZ DUTY 4.0 C MS?
- Manual safety. It adds a thumb lever to the firing pin block, trigger safety and trigger bar safety that every DUTY has.
- Does the manual safety change the trigger?
- No. CZ rates the trigger the same on both versions: 5.6 pounds with a 4 mm reset.